Fetching Indeed Job Listings

Latest Jobs RSS Feed Latest Jobs (page 5)

  1. Type
    Internship
    Job
    welding plastic machine manufacturers welding plastic machine manufacturers – Posted by pa520ting
    Location
    Anywhere
    Date Posted
    27 Aug 2018
  2. Type
    Internship
    Job
    Surgical Orthopedic Table manufacturers Surgical Orthopedic Table manufacturers – Posted by pa520ting
    Location
    Anywhere
    Date Posted
    27 Aug 2018
  3. Type
    Full-Time
    Job
    white sesame sauce in stock white sesame sauce in stock – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  4. Type
    Full-Time
    Job
    Threaded Spring Low Lift Safety Valve manufacturers Threaded Spring Low Lift Safety Valve manufacturers – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  5. Type
    Full-Time
    Job
    Customized PU Kids Sofa Customized PU Kids Sofa – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  6. Type
    Full-Time
    Job
    automatic blow moulding manufacturers automatic blow moulding manufacturers – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  7. Type
    Full-Time
    Job
    Technical Specification Product Name: Epoxy Coal Tar Anticorrosive Paint –Black & Brown Model No: 725-H57-08 Product Description 1. A two epoxy tar coating that combines toughness, adhesion and chemical resistance of epoxy resins with excellent sea water 2. VOC less than 180 g/L Intended Uses 1. For use in the exterior of pipeline of city establishment such as tap water and natural gas pipeline 2. For use in steel frame of road and bridge Product Information 1. Volume Solids 78%±3% 2. Finish/Sheen Seim-Gloss 3. Typical Film Thickness 80 microns dry (102 microns wet) 4. Theoretical Coverage: 5.6㎡/L at typical film thickness 5. Mix Ratio: 3:1(volume) 20:1(mass) 6. Method of Application Airless Spray No Recommended Air Spray No Recommended Brush/Roller Recommended 7. Thinner: Not recommended .Use water only in exceptional circumstances(max 5% by volume) 8. Induction Period 10°C 25°C 35°C 40min 20min 10min 9. Drying Information 10°C 25°C 35°C Touch Dry 4H 2H 1H Hard Dry 48H 24H 12H Pot Life 4H 2H 1H Overcoatings Data: Substrate Temperature Overcoated By 10°C 25°C 35°C Min Max Min Max Min Max 725-H57-08 48H 10D 24H 7D 12H 5D Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C. Shelf Life: 12Months minimum at 25°C。Subject to re-inspection thereafter. 10. Pack Size: Part A 20.7kg/13.5L in 20L container Part B 6.9KG/6.5L in 20L container Surface Preparation: 1. Steel Pipe Remove weld spatter and smooth weld seams and sharp edges. The surfaces should be blast cleaned to Sa2.5(GB/T8923-1988). The weld seams areas could be to St3(GB/T8923-1988) 2. Apply 725-H57-08 before oxidation occurs. If oxidation has occurred, The entire oxidized area should be reblasted to the standard specified above. 3. Concrete Pipe Remove loose powder of the cement, attached organisms, mud, oil or grease and other foreign matter thoroughly, and oil can be cleaned by scour. Limitations a. This product will not cure adequately below 5°C。For maximum performance ambient curing temperature should be above 10°C b. Apply in good weather, Temperature of the surface to be coated must be least 3°C above the dew point when the humidity is lower than 85% c. Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85% d. In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure. e. The dry time and over coating interval may change according to the environment factors. f. Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.marine coating companies website:http://www.huisinschem.com/marine-coatings/ Customized Aluminum Pin Rectangle Heat Sink Technical Specification Product Name: Epoxy Coal Tar Anticorrosive Paint –Black & Brown Model No: 725-H57-08 Product Description 1. A two epoxy tar coating that combines toughness, adhesion and chemical resistance of epoxy resins with excellent sea water 2. VOC less than 180 g/L Intended Uses 1. For use in the exterior of pipeline of city establishment such as tap water and natural gas pipeline 2. For use in steel frame of road and bridge Product Information 1. Volume Solids 78%±3% 2. Finish/Sheen Seim-Gloss 3. Typical Film Thickness 80 microns dry (102 microns wet) 4. Theoretical Coverage: 5.6㎡/L at typical film thickness 5. Mix Ratio: 3:1(volume) 20:1(mass) 6. Method of Application Airless Spray No Recommended Air Spray No Recommended Brush/Roller Recommended 7. Thinner: Not recommended .Use water only in exceptional circumstances(max 5% by volume) 8. Induction Period 10°C 25°C 35°C 40min 20min 10min 9. Drying Information 10°C 25°C 35°C Touch Dry 4H 2H 1H Hard Dry 48H 24H 12H Pot Life 4H 2H 1H Overcoatings Data: Substrate Temperature Overcoated By 10°C 25°C 35°C Min Max Min Max Min Max 725-H57-08 48H 10D 24H 7D 12H 5D Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C. Shelf Life: 12Months minimum at 25°C。Subject to re-inspection thereafter. 10. Pack Size: Part A 20.7kg/13.5L in 20L container Part B 6.9KG/6.5L in 20L container Surface Preparation: 1. Steel Pipe Remove weld spatter and smooth weld seams and sharp edges. The surfaces should be blast cleaned to Sa2.5(GB/T8923-1988). The weld seams areas could be to St3(GB/T8923-1988) 2. Apply 725-H57-08 before oxidation occurs. If oxidation has occurred, The entire oxidized area should be reblasted to the standard specified above. 3. Concrete Pipe Remove loose powder of the cement, attached organisms, mud, oil or grease and other foreign matter thoroughly, and oil can be cleaned by scour. Limitations a. This product will not cure adequately below 5°C。For maximum performance ambient curing temperature should be above 10°C b. Apply in good weather, Temperature of the surface to be coated must be least 3°C above the dew point when the humidity is lower than 85% c. Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85% d. In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure. e. The dry time and over coating interval may change according to the environment factors. f. Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.marine coating companies website:http://www.huisinschem.com/marine-coatings/ Customized Aluminum Pin Rectangle Heat Sink – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  8. Type
    Full-Time
    Job
    marine coating companies marine coating companies – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  9. Type
    Full-Time
    Job
    wholesale motorcycle maintenance free battery wholesale motorcycle maintenance free battery – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018
  10. Type
    Full-Time
    Job
    OTR Tires price OTR Tires price – Posted by pati520g
    Location
    Anywhere
    Date Posted
    10 Aug 2018